Keep your misting lines tidy and protected with these 1/4″ rubberized tubing mounts. They help homeowners and pros route lines cleanly on patios, pergolas, and work areas. The big benefit is a secure, low-profile hold that reduces vibration and keeps installs looking sharp.
These mounts secure and guide 1/4″ OD misting tubing along beams, posts, railings, and walls. The rubberized body cushions the line to reduce vibration and rattle. It also helps prevent scuffs on surfaces and extends the life of your tubing by limiting movement.
Pick these mounts when you want a clean, durable install that protects your gear and looks professional.
These mounts fit standard 1/4″ OD misting lines used in high-pressure, mid-pressure, and low-pressure systems when sized correctly. Use them to run straight lines along joists, to drop clean feeds to nozzles, or to turn corners without slack. They are a simple way to keep lines tight and out of sight in dining areas, shade structures, and service corridors. For more build-out parts and matching hardware, see Misting Accessories.
Plan your route, place mounts at even intervals, and press the tubing into each clip. Keep runs straight and avoid sharp bends. After mounting, bring the system up to pressure and check for movement.
Measure the path for your 1/4″ line and mark mounting points every 12–24 inches. Add extra marks near turns, drops, and nozzles.
Test a mount with a short piece of 1/4″ OD tubing. Make sure the clip seats fully and the opening faces the direction that eases install and service.
Attach mounts to the surface as planned. Keep them aligned so the line runs straight and true.
Press the tubing into each mount until it snaps into place. Avoid twisting the line. Keep gentle bends and smooth transitions.
Use 12–18 inch spacing on visible runs for a crisp look. Use 18–24 inch spacing in hidden or sheltered areas. Add a mount near each nozzle or junction.
Start the pump and reach normal operating pressure. Watch the mounted sections as the line pressurizes.
Listen and look for any movement, rattle, or scuff points. Add a mount or slightly shift a clip to tighten the run as needed.
Check mounts at the start of each season and after heavy use. Look for wear, looseness, or scuffs. Replace any mount that has lost grip or shows damage. Wipe dust and debris from the line and mounts to keep the system clean.
Will these fit my line?
Yes, they are designed for 1/4″ OD misting tubing.
What surfaces can I mount to?
They work on common flat surfaces like wood, metal, and masonry when the proper fastener is used for the surface.
How far apart should I place mounts?
Plan 12–18 inches for visible runs and 18–24 inches where looks do not matter as much.
Are they suitable outdoors?
Yes, the rubberized body is weather resistant and built for outdoor use.
Can I reuse a mount?
You can remove and reinstall if the clip remains tight. Replace any mount that has lost grip.
Do they reduce vibration?
Yes, the rubberized grip helps damp movement and rattle.
What if I need to return them?
Standard return and warranty terms apply. Contact support for help.
Round out your install with matching parts and fan options for any space. Explore more hardware and fan types suited to your layout and budget.
Orders ship quickly and are packed to protect your parts. Returns are simple if you need to swap or send back unused items. Contact our support team for help selecting parts and compatibility questions.
Plan your route, place mounts at even intervals, and press the tubing into each clip. Keep runs straight and avoid sharp bends. After mounting, bring the system up to pressure and check for movement.
Measure & Mark RunsMeasure the path for your 1/4″ line and mark mounting points every 12–24 inches. Add extra marks near turns, drops, and nozzles.
Check Tubing Fit & OrientationTest a mount with a short piece of 1/4″ OD tubing. Make sure the clip seats fully and the opening faces the direction that eases install and service.
Seat the Mounts: Attach mounts to the surface as planned. Keep them aligned so the line runs straight and true.
Secure & Align Tubing: Press the tubing into each mount until it snaps into place. Avoid twisting the line. Keep gentle bends and smooth transitions.
Spacing for Clean Lines: Use 12–18 inch spacing on visible runs for a crisp look. Use 18–24 inch spacing in hidden or sheltered areas. Add a mount near each nozzle or junction.
Bring System to Operating Pressure: Start the pump and reach normal operating pressure. Watch the mounted sections as the line pressurizes.
Inspect for Rattle & Adjust: Listen and look for any movement, rattle, or scuff points. Add a mount or slightly shift a clip to tighten the run as needed.
Yes, they are designed for 1/4″ OD misting tubing.
They work on common flat surfaces like wood, metal, and masonry when the proper fastener is used for the surface.
Plan 12–18 inches for visible runs and 18–24 inches where looks do not matter as much.
Yes, the rubberized body is weather resistant and built for outdoor use.
You can remove and reinstall if the clip remains tight. Replace any mount that has lost grip.
Yes, the rubberized grip helps damp movement and rattle.
Standard return and warranty terms apply. Contact support for help.
Orders are carefully packed to meet the demands of event use and are shipped promptly to help you stay on schedule. If your plans change, returns are straightforward for unused items within the stated return window, making the process hassle-free.
Our support team is always available to assist with every step of your project—from product sizing.
Get early access to exclusive Cool-Off deals, product launches, and seasonal promotions when you sign up for our email list. Be the first to know about new misting systems, limited-time offers, and outdoor cooling innovations. Sign up now.
Since 2004, we’ve set the industry standard. As a thank you for choosing the experts, take 5% off your first system.
