Make clean 90° turns in your 1/4″ OD misting line with this slip-lock elbow. It is for homeowners, contractors, and facility teams who want neat corners without kinks. The big benefit is a tool-free, push-to-connect seal that holds tight and keeps flow steady.
This elbow changes the direction of 1/4″ OD misting tubing by 90°. It lets the line turn at posts, beams, and panels without bending the tube too hard. That helps prevent kinks and keeps water moving with minimal loss.
Pick this elbow when you need tight bends, fast installs, and a tidy finish in small spaces.
This elbow works with common 1/4″ OD misting tubing. Match the fitting and tubing to the pressure rating of your system. Use it to turn at beam edges, route through cabinets, or finish neat drops to nozzle lines. For more parts that help with routing, mounting, and service, visit Misting Accessories.
Inspect elbows at the start of each season. If a tube end looks worn or scratched, cut a fresh end and reseat. Replace any fitting that shows damage or no longer grips well.
Build a clean, reliable system with the right mix of fittings, mounts, and fans. Explore these options to finish your layout.
Prepare the tubing ends, push each end into the fitting until fully seated, then test at normal pressure. If you see a drip, re-seat or recut the end and try again.
Cut Tubing Square
Use a sharp tube cutter. Make a clean, square cut to improve sealing and grip.
Deburr & Clean Ends
Remove any burrs or oval spots. Wipe dust and moisture from the tube before insertion.
Push to Full Seat
Insert the tube straight into the elbow until you feel it stop. A firm push is needed to pass the grip ring and seal.
Orientation Check at 90°
Rotate the elbow body to align your run at a true right angle. Keep the tube straight as it enters the fitting.
Pull Test to Confirm Grip
Gently pull back on the tube. It should not slide out. If it moves, push further until fully seated.
Bring System to Operating Pressure
Start the pump and let the line reach normal pressure. Watch the elbow and nearby joints.
Inspect for Leaks & Re-seat if Needed
If you see a slow drip, depressurize, remove the tube, recut square, and reinstall. Test again.
Yes, if the tube end is fresh and seats fully. Always inspect the grip and seal and recut the tube square.
Use only if the fitting and tubing match your system rating. Check your system specs before install.
Yes. It is suitable for most covered or outdoor setups when matched to the system.
Common 1/4″ OD misting tubing types are fine when round, clean, and cut square.
Depressurize. Hold the release collar (if present) and pull the tube straight out. Cut a fresh end before reuse.
No. The push-to-connect seal works when the tube is cut square and fully seated.
Orders ship fast and are packed with care. Returns are simple for unused items within the stated window. Contact our support team for help selecting parts and compatibility questions.
Get early access to exclusive Cool-Off deals, product launches, and seasonal promotions when you sign up for our email list. Be the first to know about new misting systems, limited-time offers, and outdoor cooling innovations. Sign up now.
Since 2004, we’ve set the industry standard. As a thank you for choosing the experts, take 5% off your first system.
