Skip to product information
Nozzle Extensions
Nozzle Extensions

Nozzle Extensions

Sale price  $6.00 Regular price  $18.00

 

Aim mist exactly where you want it. These nickel-plated brass Nozzle Extensions move the spray point away from brackets, beams, or foliage so coverage is even and overspray is reduced. Rated for high-pressure systems only.

What These Extensions Do

They shift a nozzle forward from the line or manifold to clear obstacles. This reduces splashback, fixes “spray shadows,” and improves the pattern at the target zone.

Why Choose These Parts

Choose extensions when you need precise placement with a clean look and fast swaps.

  • Fine-tune nozzle position for better coverage
  • Helps cut overspray and wet spots
  • Four handy lengths for flexible stand-off
  • Quick to install and remove for service
  • Durable nickel-plated brass for long life

Key Specs

  • Material: Nickel-plated brass
  • Pressure Rating: 1500 PSI (high pressure only)
  • Interface: Standard misting nozzle thread (match to your system)
  • Length Options: 2″, 4″, 6″, 8″
  • Package Contents: Single extension (select length)

Compatibility & Use Cases

Use with high-pressure misting systems rated to 1500 PSI. Match threads to your nozzle and port. Ideal at pergola beams, fascia edges, trellises, or near plants where spray needs extra stand-off. For adapters, clips, and other small parts, see Misting Accessories.

Care & Maintenance

Inspect joints at the start of each season. Keep threads clean. Avoid overtightening to protect seals. In hard-water areas, clean nozzles often.

Troubleshooting

  • Drip at the joint: Depressurize, clean threads, and re-seat hand-snug.
  • Spray shadow or splashback: Increase stand-off length or re-aim the nozzle.
  • Weak or uneven pattern: Clean or replace the nozzle; check upstream filter.

Product Details

detailed_img

Key Specs
  • Material: Nickel-plated brass
  • Pressure Rating: 1500 PSI (high pressure only)
  • Interface: Standard misting nozzle thread (match to your system)
  • Length Options: 2″, 4″, 6″, 8″
  • Package Contents: Single extension (select length)

2”, 4", 6” and 8” Nickel Plated Brass Nozzle Extensions 1500 PSI Rated High Pressure Only

Installation Overview

Prepare the joint, install the extension and nozzle, then pressure test.

Preparation

Shut off water and relieve pressure. Confirm thread match. Clean the mating threads and seats.

Install

Thread the extension into the port by hand, then snug gently. Install the nozzle onto the extension and hand-snug. Do not overtighten.

Pressure Test

Bring the system to operating pressure. Check the joint and the nozzle for leaks. Re-seat if needed and adjust aim.

product media

Frequently Asked Questions

No. They are rated for high-pressure systems up to 1500 PSI.

Choose extensions that share the same thread standard as your nozzle and port.

It is possible, but keep the assembly short to avoid leverage on the port. Use the fewest parts needed.

Yes. Nickel-plated brass handles outdoor use well when installed and supported properly.

Remove the nozzle for cleaning. Wipe the extension threads and reinstall hand-snug.

Shipping, Returns & Support

Orders ship promptly and arrive ready to install. Returns are simple for unused items within the stated window. Contact our support team for help with thread matching, length selection, and placement tips.

detailed_img