Branch your misting line cleanly. The Slip-Lock Misting Tee — 3/8″ lets you split a straight run into two directions with a compact, push-to-connect fitting. It’s ideal for creating side runs around corners, posts, and pergolas without special tools.
This tee joins three sections of 3/8″ OD tubing so your line can continue forward while adding a side branch. The slip-lock ends grip the tube securely to help maintain flow and reduce leaks when installed correctly.
Pick this tee when you want fast branching and a tidy layout.
Use in layouts that need a clean side branch—around pergola beams, along fascia, or to feed a second path down a railing. Confirm your tubing is true 3/8″ OD and that your system pressure matches the fitting’s rating. For clips, filters, and additional fittings to finish the run, see Misting Accessories.
Check joints seasonally. If you need to reconfigure, depressurize, press the release collar to remove tubing, and re-cut square before re-inserting. Keep filters serviced to protect downstream nozzles.
Slip Lock Misting Tees allow you to add mist where ever you want along your mist line.
Prepare the tube ends, push to full seat, and test under operating pressure.
Cut Tubing Square
Use a sharp tube cutter. Avoid angled or crushed ends.
Deburr & Clean
Remove burrs and wipe debris so seals aren’t damaged.
Push to Full Seat
Insert the tube into each port until it bottoms out. You should feel a firm stop.
Pull Test
Gently pull back on each tube to confirm the collet has gripped.
Support the Joint
Add a mount near the tee to minimize vibration and leverage on the fitting.
Bring to Operating Pressure
Pressurize the system and inspect each connection.
Inspect for Leaks
If you see a drip, depressurize, re-cut the tube square, and re-seat fully.
Yes—if your tubing is 3/8″ outside diameter. Measure before ordering.
Often, yes. Reuse requires clean, square tube ends. If the tube is scratched or ovaled, trim to fresh material.
Most 3/8″ OD misting tubing (poly, nylon, or similar). Ensure round, undamaged ends.
Depressurize, press the release collar toward the body, and pull the tube straight out.
Yes. Support the joint and avoid constant bending loads for longest life.
Orders ship promptly and are packed with care. Returns are simple for unused items within the stated window. Need help with layout or fitting selection? Contact our support team for quick sizing and compatibility guidance.
Get early access to exclusive Cool-Off deals, product launches, and seasonal promotions when you sign up for our email list. Be the first to know about new misting systems, limited-time offers, and outdoor cooling innovations. Sign up now.
Since 2004, we’ve set the industry standard. As a thank you for choosing the experts, take 5% off your first system.
