Skip to product information
Brass ball valve with yellow handle on a transparent background
Brass ball valve with yellow handle on a transparent background

Shut Off Valve

Sale price  $19.00 Regular price  $28.00

Control water flow to your misting line with a simple turn. The Shut-Off Valve lets you start or stop a section fast. Use it for daily control, service work, or seasonal shutdowns.

What This Valve Does

It opens or closes flow in a misting run. Close the valve to isolate a zone or to work on fittings downline. Open it to return the system to normal operation.

Why Choose This Valve

Choose this part when you want clear, manual control with an easy install.

  • Quick on/off for lines or zones
  • Helps with service and troubleshooting
  • Simple, reliable manual action
  • Compact body for tight spots
  • Fits a straight run for clean routing

Compatibility & Use Cases

Place the valve at a zone start, before long runs, or ahead of areas that need frequent service. Install more than one to split a large layout into simple sections. For adapters, clips, and filters that complete the job, see Misting Accessories.

Care & Maintenance

Exercise the valve a few times each season to keep movement smooth. Keep the area clean. Inspect seals and joints; replace worn parts if needed.

Troubleshooting

  • Seepage at fittings: Depressurize, re-seat connections, and verify square cuts or thread match.
  • Handle hard to turn: Depressurize and apply manufacturer-approved lubricant to the stem if applicable.
  • Valve will not fully shut: Check for debris; flush upstream filter and cycle the valve.

Product Details

detailed_img

Key Specs
  • Function: Inline shut-off (manual)
  • Size/Thread: Match to your line or manifold (varies by system)
  • Package Contents: Single valve
  • Compatibility: Misting lines/manifolds sized to match
  • 1/4" or 3/8” Push Lock Fittings on Each End
  • For use w/Nylon Tubing or 1/4" Stainless 
  • Creates Zone Control and Custom Manifolds

Installation Overview

Cut into a straight section, fit the valve with matching connections, then test for leaks.

Preparation

Depressurize & Mark Location

Shut off the pump and water. Relieve pressure. Mark a convenient spot with enough hand room to turn the handle.

Install

Cut & Connect

Cut the line square. Install the valve using the correct fittings for your system. Support nearby tubing so the valve does not carry weight.

Align Handle

Set the handle for clear on/off direction and easy reach.

Test

Open, Pressurize & Inspect

Open the valve, restore water and power, and check all joints. Close the valve to confirm full shut-off, then reopen for service.

product media

Frequently Asked Questions

At the start of a zone, near the pump, and before long runs so you can isolate sections for service.

Yes, when the size and connection style match your line or are adapted to it.

Yes. Install out of standing water and support the line to reduce strain.

Filtration is recommended to protect valves and nozzles from debris.

Cycle it at the start of each season and anytime you service the run to keep movement smooth.

Shipping, Returns & Support

Orders ship promptly and are packed with care. Returns are simple for unused items within the stated window. Need help choosing the right size or connection? Contact our support team for sizing and compatibility guidance.

detailed_img